鄂尔多斯盆地富县地区延长组长7段深水重力流沉积特征及油气勘探意义
- 收稿日期:
2024-02-26
- 网络出版日期:
2024-06-17
摘要: 【目的】鄂尔多斯盆地三叠系延长组长7段主要发育半深湖-深湖亚相,深水重力流沉积普遍发育。【方法】以盆地东南部的富县地区长7段为研究对象,基于13口取芯井厘米级岩心精细描述、粒度分析和测井资料,研究了长7段重力流沉积的类型及特征、分布规律及演化模式,结合试油、试采资料分析了重力流对油藏分布的控制作用。【结果】结果表明:富县地区长7段主要发育滑动-滑塌、砂质碎屑流和浊流3种类型的重力流沉积。滑动-滑塌以发育包卷层理、揉皱变形构造、同沉积阶梯状小断层及滑动面为特征,以砂岩和泥岩的混合沉积为主;砂质碎屑流发育厚层块状砂岩、泥岩撕裂屑及泥包砾结构,单砂体厚度介于0.3-3.5m,累积厚度可达10m以上;浊流发育火焰状构造和鲍马序列,多见不完整的A段、B段、D段和E段,砂体规模小,发育受限,单砂体厚度一般几厘米至几十厘米。【结论】长7段共划分出6种典型测井相组合,11种岩相类型。该区域重力流的形成机制为水下坡折带、火山和地震。顺物源方向,地层加厚反映出沉积环境从三角洲前缘过渡到半深湖-深湖沉积;垂向上,3种重力流类型叠置出现,并以砂质碎屑流沉积占主体。重力流砂体中砂质碎屑流含油情况最好,以油斑-油浸级别为主,勘探成功率高达78.5%,为下一步勘探的首选类型。
Sedimentary characteristics of deep-water gravity flow in Chang 7 Member of Yanchang Formation in Fuxian area, Ordos Basin and its significance for petroleum exploration
- Received Date:
2024-02-26
- Available Online:
2024-06-17
Abstract: [ Objective ] The Chang 7 member of Triassic Yanchang Formation in Ordos Basin mainly develops semi-deep lake-deep lake subfacies, and deep-water gravity flow deposits are generally developed. [ Method ] Taking the Chang 7 Member in Fuxian area of the southeastern basin as the research object, based on the fine description results of centimeter-level cores from 13 coring wells, combined with particle size analysis and logging data, the types and characteristics, formation mechanism, distribution law and evolution model of gravity flow deposits in the Chang 7 Member were studied. Combined with oil test and production test data, the control effect of gravity flow on reservoir distribution was analyzed. [ Result ] The results show that the Chang 7 member in Fuxian area mainly develops three types of gravity flow deposits : sliding-slump, sandy debris flow and turbidity flow. The sliding-slump is characterized by the development of roll bedding, crumpled deformation structure, syndepositional stepped small faults and sliding surface, and is dominated by the mixed deposition of sandstone and mudstone. The sandy debris flow develops thick massive sandstone, mudstone tearing debris and mud-encapsulated gravel structure. The thickness of single sand body is between 0.3-3.5 m, and the cumulative thickness can reach more than 10 m. Turbidity flow develops flame structure and Bouma sequence, and incomplete A,B,D and E sections are common. The sand body is small in scale and limited in development. The thickness of single sand body is generally several centimeters to dozens of centimeters. [ Conclusion ] The Chang 7 member is divided into 6 typical logging facies combinations and 11 lithofacies types. The formation mechanism of gravity flow in this area is underwater slope break zone, volcano and earthquake. Along the source direction, the thickening of the stratum reflects the transition of the sedimentary environment from the delta front to the deep lake-semi-deep lake deposit ; vertically, three types of gravity flow overlap, dominated by sandy debris flow. The sandy debris flow in the gravity flow sand body has the best oil content, and the main body is oil spot-oil immersion.
张军, 白玉彬, 闫新智, 赵靖舟, 徐宁. 鄂尔多斯盆地富县地区延长组长7段深水重力流沉积特征及油气勘探意义[J]. 沉积学报. doi: 10.14027/j.issn.1000-0550.2024.059
Sedimentary characteristics of deep-water gravity flow in Chang 7 Member of Yanchang Formation in Fuxian area, Ordos Basin and its significance for petroleum exploration[J]. Acta Sedimentologica Sinica. doi: 10.14027/j.issn.1000-0550.2024.059
Citation: |
Sedimentary characteristics of deep-water gravity flow in Chang 7 Member of Yanchang Formation in Fuxian area, Ordos Basin and its significance for petroleum exploration[J]. Acta Sedimentologica Sinica. doi: 10.14027/j.issn.1000-0550.2024.059
|